Real Estate Blog

How to Open Your Pool for the Summer: A Quick and Easy Guide

Ah, summer! It's the season of barbecues, sundresses, and, best of all, pool parties. If you’re lucky enough to have a pool, the warm weather is your cue to get it swim-ready. Opening your pool for the season might seem daunting, but with a few simple steps, you can ensure it’s safe, clean, and ready for a dive. Here’s a streamlined guide to help you kick off the summer with a splash!

Step 1: Uncover and Clean

Start by removing the pool cover. It’s likely collected water, leaves, and debris over the winter, so clean it thoroughly before storing it away. This is also a good time to skim the surface of the pool and vacuum any debris that might have made its way into the water.

Step 2: Inspection Time

Next, give your pool and its equipment a thorough inspection. Check for any signs of damage like cracks in the pool liner, leaks around the fittings, or wear and tear in the piping. Ensure all equipment, including the pump, filter, and heater, are in good working condition. This is crucial for maintaining a clean and efficient pool throughout the season.

Step 3: Reconnect and Refill

If you winterized your pool, you’d likely have disconnected the equipment and possibly drained some water to protect it from freezing. Now’s the time to reconnect everything. Also, top off the water level; typically, it should be at the middle of your pool skimmer's opening for optimal circulation.

Step 4: Balance the Chemistry

Before you dive in, it's essential to balance your pool's chemistry. Start by testing the pH, alkalinity, and chlorine levels. Ideally, your pH should be between 7.2 and 7.6, and alkalinity between 100 ppm and 150 ppm. Adjust the chemicals as needed to achieve these levels. If you're unsure, take a water sample to your local pool supply store for a detailed analysis.

Step 5: Run Your Filter

Once everything is connected and balanced, run your pool’s filter for at least 24 hours to mix the chemicals thoroughly and filter out any remaining impurities. This step is vital to ensure that your pool water is clean and clear.

Step 6: Final Touches

After the water has been filtered and the chemical levels are stable, give your pool one last check. Look over the pool area for any safety hazards and make sure all safety equipment is accessible. Lastly, take a moment to clean and arrange your poolside furniture.

Step 7: Dive In!

Now that your pool is sparkling clean and safe, it’s time to enjoy! Whether you’re hosting a pool party or looking forward to quiet weekends lounging by the water, a well-maintained pool is your ticket to a fabulous summer.

Opening your pool doesn’t have to be a chore. With these steps, you can efficiently get your pool up and running for the season. Remember, regular maintenance is key to keeping your pool enjoyable all summer long. Happy swimming!

Contact us anytime if you have any questions about how to prepare your pool for listing or if you just need a referral to a good pool maintenance company. We have an RSVP concierge service that includes loads of referrals! 905.335.4102 or info@roccasisters.ca